1.2k. Name: John. Ford Model: Focus Mk4 ST-Line 1.0 ecoboost. Ford Year: 2019. UK/Ireland Location: Tyne & Wear. Posted October 29, 2019. If you enable auto-hold it keeps all brakes on and disengages auto when you go to pull away (same as handbrake). This also stays on during stop/start sequences so no need to do it yourself.
I have a Focus ST Line (automatic) which I got new in December 2018. Before it went in for its first service today, it had a digital speedometer in the Information Display. As a result of the serviced, the digital speedometer has been replaced by an image of a Focus (car). I gather the garage did some software/firmware updates.
26 posts Ā· Joined 2017. #3 Ā· Oct 4, 2017. Pretty sure you need the paid version. I changed my battery ( and suspect the deal I got my used 2013) did before I had it. Anyways, my new battery was only showing 25% charge, so bought a ELM327 with a modified MS-CAN switch and reset my BCM.
On 1/26/2020 at 11:05 AM, Mark-UK said: Auto hold has done the same for me but very very rarely, the failure to apply the parking brake on engine switch off, is all the time I just find it completely random as to when it works or doesn't. As you say for Ā£25K cars there are just too many glitches. Yes.
I have a 2019 New Ford Focus Titanium purchased in August 2019. It has worked well until this morning. After a heavy snow fall last night the touch screen didn't respond when the car was switched on at 9am. The screen started working again when switched back on at 10am. (probably when it thawed out) I spoke to the local dealer who sold me the car. Procedura de restare a intervalului de service pentru Ford Focus Mk3 (2011-2016). Procedura foarte simpla Disconnect the two battery terminals. Undo the clamp and then remove anything else that gets in the way like the airbox. Sorry don't have exact info for your model. Remember to give the new battery a charge before fitting. After fitting the battery you will need to reset the BMS.
Ciao ragazzi come al solito in pochi secondi vi mostro come eseguire il reset del service della vostra ford focus
With only one (1) fob near the vehicle, start the engine. With the engine running, press the Lock or Unlock button on the key fob one time. Repeat this procedure with all additional affected key fobs. When the vehicle properly samples the new key battery level the message will no longer be present. EFFECTIVE DATE: 04-MARCH-2014.
5960 posts Ā· Joined 2016. #7 Ā· Apr 1, 2022. F32 (10amp) is the primary fuse for your EVAP, VCT solenoids, and O2 sensors. F36 (10amp) is your PCM (powertrain control module) Check to make sure your wiring harness isn't damaged. Double check the connector (C1035C) at the BJB (battery junction box) Is fully seated.
Engine fault service now is a message that will pop up on your Fordās display screen when there is an issue with the engine. The message may also say āservice required soonā or āengine system fault.ā If you see this message, it means that there is a problem with your vehicle. If your Ford is one of those unlucky ones, donāt worry. The hill start assist was disabled even after two checks by Ford mechanics. Sometimes the "unavailable HSA" message appeared when I brake down in a street. Very strange!!! I made the diagnosis and in my opinion it is a brake imbalance that leads to missing messages on the ABS sensors.
.
